A9 Mini Wi-Fi Camera 1080p Full HD Wireless Ip Camera

Description :

Basic Settings and Indicator Status:

A new camcorder or camcorder is installed in a new location, please reset the camcorder to factory settings. (After the camcorder is started, press and hold the camcorder reset button for more than 5 seconds), after the camcorder restarts turn on the AP mode, the WIFI indicator flashes slowly (Flashes once 0. 5 seconds). Then open the phone settings, connect the phone to the camcorder AP hot spot (the WIFI network with the camcorder UID), and wait for the phone to switch to the camcorder WIFI network before opening the App.

Indicator Status:

1. In AP mode after booting, the blue indicator is always on and the red indicator is the USB power indicator, and it goes out after fully charged.
2. When configuring Wi-Fi routing, thread indicator is normally on, while the blue one flickers rapidly. After a successful configuration, the blue indicator is normally on. (Please confirm whether the Wi-Fi password is correct if the blue indicator keeps flickering rapidly)
3. The green indicator is a charging indicator, and it will automatically go out after the camcorder is fully charged.

Note: Please inspect the following items if the App keeps prompting failures;

1. Before configuring the Wi-Fi network, the camcorder indicator does not flicker slowly or it is not started;
2. The phone fails to connect to the camcorder AP, and it is required to connect the phone to the AP hotspot of the camcorder;
3. An ordinary router is compatible , but the public router fails to be compatible because it is required to logon for authentication;
4. Avoid any mistake of network name, password, and UID;
5. Chinese Wi-Fi names, passwords and special symbols are not compatible currently:

F.5G Wi-Fi signals are not compatible;